If you have significant cutting work to do, you need to have the circular saw with you. It allows you to make perfect cuts in record time. Whether on the table or portable, it’s the tool to look for if you want straight and quick cuts. However, to start using it, you must adhere to a number of principles for your own safety. Moreover, if you have just acquired it, you need to learn how to use it. To this end, it would be wiser to add the following information to the details present in the user manual for your cuts.
Make general adjustments for your cuts
For the cuts you need to make, you should opt for a specific type of blade for your circular saw available at https://www.scie-circulaire.org. A blade is intended for cutting a particular material, but to avoid searching too much, simply choose a multi-material circular saw. The latter has a versatile blade. To install the blade, you will loosen the fixing screw using a hex key. Then, you will carefully place your chosen blade on the shaft, orienting its tooth tips upwards. Furthermore, you will see an arrow indicating the direction of rotation of the blade when you remove the protective cover to install the blade. After that, you will adjust the splitter with an Allen key. This will be done while maintaining a minimum gap of 3 mm between the bottom of the splitter and that of the blade.
A découvrir également : Discover how to eat well on a budget with delicious and healthy recipes
Simple techniques for your cuts
You will then start your machine with the trigger. This way, you can saw freehand while keeping the blade aligned with your cutting line. For a precise and even cut, you will use a cutting guide. Another alternative is to use a wooden batten. It will be placed parallel to your cutting line, and you must hold it in place with clamps. Now, you will make your cut by sliding the saw along the direction of the guide. To make an angled cut, you just need to secure a batten using a clamp to serve as your cutting guide. You can also make a 90° cut with your circular saw. To do this, you will simply advance your saw while keeping the base on the support and keeping your eyes on your cutting line. But first, don’t forget to adjust the guide according to the width of the cut you need to make.
Other cuts to make with your circular saw
For a parallel cut, you will use the side guide. The bevel cut will be made by adjusting your base. Here, you need to securely fasten it to your graduated scale and make your cut. You can also use this circular saw to cut a wood assembly. Here, you must first mark the part; this will be done before mounting your fine-toothed saw. The depth of your cut must now adapt to the dimensions of your rebate. You must also secure your board between the jaws to make the first cut. For the second cut, you will turn the material and make any necessary adjustments. Now remove the waste and admire your masterpiece.
Lire également : How to Clean a Gas Lawn Mower?